Adding Fan Content to Minkata -- Implementation

Discussions about the OpenUru.org Minkata test shard

Moderator: rarified

User avatar
rarified
Member
Posts: 1061
Joined: Tue Dec 16, 2008 10:48 pm
Location: Colorado, US

Re: Adding Fan Content to Minkata -- Implementation

Post by rarified »

Do you have access to a file sharing service (Google docs, DropBox, etc)? I can pick up your pre-built files from there.

If you want me to cook them you need to let me know the Blender/Korman versions you need as well as any prerequisites.

Once I have them in hand I can start work on reactivating the beta server.

_R
One of the OpenUru toolsmiths... a bookbinder.
User avatar
J'Kla
Member
Posts: 31
Joined: Sat Dec 13, 2008 5:28 pm
Location: Newcastle upon Tyne

Re: Adding Fan Content to Minkata -- Implementation

Post by J'Kla »

The whole thing blender files and cooked version comes in at 910k in a rar file. Does not rely warrant a drop box.

Unzip to the root of a drive as a directory called Abmiram Factory it could be stuck on a USB stick.

Korman needs to be run on Blender 2.79 (32 or 64 Bit)

There's full details on the GoW Wiki follow this link

https://www.guildofwriters.org/wiki/Korman:Installation

Korman is a basic add on for Blender it is very easy to use
User avatar
rarified
Member
Posts: 1061
Joined: Tue Dec 16, 2008 10:48 pm
Location: Colorado, US

Re: Adding Fan Content to Minkata -- Implementation

Post by rarified »

Then go ahead and email me an attachment. Bandwidth is not an issue. 8-)

_R
One of the OpenUru toolsmiths... a bookbinder.
User avatar
J'Kla
Member
Posts: 31
Joined: Sat Dec 13, 2008 5:28 pm
Location: Newcastle upon Tyne

Re: Adding Fan Content to Minkata -- Implementation

Post by J'Kla »

No e-mail attachment option via this forum.

Testing via Destiny is working. :)
User avatar
JWPlatt
Member
Posts: 1137
Joined: Sun Dec 07, 2008 7:32 pm
Location: Everywhere, all at once

Re: Adding Fan Content to Minkata -- Implementation

Post by JWPlatt »

Use rarified's email address to send attachments, which you have.
Perfect speed is being there.
User avatar
J'Kla
Member
Posts: 31
Joined: Sat Dec 13, 2008 5:28 pm
Location: Newcastle upon Tyne

Re: Adding Fan Content to Minkata -- Implementation

Post by J'Kla »

Doh! 8-)
User avatar
rarified
Member
Posts: 1061
Joined: Tue Dec 16, 2008 10:48 pm
Location: Colorado, US

Re: Adding Fan Content to Minkata -- Implementation

Post by rarified »

Got it, will look in a day or two.

_R
One of the OpenUru toolsmiths... a bookbinder.
User avatar
J'Kla
Member
Posts: 31
Joined: Sat Dec 13, 2008 5:28 pm
Location: Newcastle upon Tyne

Re: Adding Fan Content to Minkata -- Implementation

Post by J'Kla »

Have you got anywhere yet. I have just finished rebuilding Nilodnam that is my gallery age I have screen shots of nearly all of the ages currently available on Deep Island there are about 5 to add that have been added to deep island since I did my original data grab I have had to remove a load that were from the original game and from three field trips.

It appears that the Destiny server I am using for testing is incapable of working with as many images as I had in the original Nilodnam.
User avatar
J'Kla
Member
Posts: 31
Joined: Sat Dec 13, 2008 5:28 pm
Location: Newcastle upon Tyne

Re: Adding Fan Content to Minkata -- Implementation

Post by J'Kla »

Rarified I have e-miled you Nilodnam as a zip this is the MOULa export from a Korman build.

Nilodnam is my Gallery age it had screen shots from the nearly all of the fan ages on Deep Island.

This works on Destiny that is where I have been testing it as a local copy.

There is nothing other than ladders and a link in no exotic python and not even an exit if you want out you use your relto book.

This age is one big loop.

Go to one side of the ladders and you can jump down this is quicker than climbing down every ladder.

Follow your nose and you end up back at the start. ;)
Post Reply

Return to “OpenUru.org Minkata Test Shard”